EMEA - EN
RATED LOADS: from 2,000 lbs, varies with gear ratio and motor HP
STANDARD STROKE: up to 24 inches
SPEED: to 170 in/min (varies with load and HP/RPM of motor)
Integral 56 frame, C-face mounting flange
A three-piece flexible coupling for easy motor assembly included
Four threaded holes in the base for standard clevis end accessory attachment. Tapped 1/2-20 UNF-2B
The ball-bearing screw type and mating nut with rolling contact reduces friction to a minimum which allows for higher speed, longer life, and lower power requirement
The steel worm and bronze gear set make operation quiet. Available in 5:1 and 20:1 ratios
Rugged, lightweight aluminum housing is corrosion resistant
Standard grease fitting on housing for easy lubrication of worm gear
Stop-disc at the end of the lifting screw prevents inadvertent run-off of ball nut
| Rated Loads | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Model Number | T Screw Diameter | Turns of Worm 1 in Travel | Torque lb./in. at 1000 lb. Loads | Motor RPM | 1/4 HP Motor | 1/3 HP Motor | 1/2 HP Motor | 3/4 HP Motor | Lifting Speed inch/minute | |||||||
| Ratio | Ratio | Ratio | Ratio | Ratio | Ratio | Ratio | ||||||||||
| 5:1 | 20:1 | 5:1 | 20:1 | 5:1 | 20:1 | 5:1 | 20:1 | 5:1 | 20:1 | 5:1 | 20:1 | 5:1 | 20:1 | |||
| M-2462 | 1.00 Dia. x 1.000 Lead Ball Screw | 5 | - | 5.3 | - | 1725 | 100 | - | 200 | - | 300 | - | 500 | - | 345 | - |
| M-2462 | 1.00 Dia. x 1.000 Lead Ball Screw | 5 | - | 5.3 | - | 1140 | 200 | - | 300 | - | 500 | - | 700 | - | 228 | - |
| M-2463 | 1.00 Dia. x 0.250 Lead Ball Screw | 20 | 80 | 1.3 | 0.6 | 1725 | 600 | 1500 | 900 | 2000 | 1300 | - | 2000 | - | 86 | 21 |
| M-2463 | 1.00 Dia. x 0.250 Lead Ball Screw | 20 | 80 | 1.3 | 0.6 | 1140 | 1000 | - | 1300 | - | 2000 | - | - | - | 57 | 14 |
|
Notes: |
||||||||||||||||
Rotating Ball Screw Model Dimensions |
|---|
