Designed with two ball bearings spaced to withstand radial and thrust loads.
Compression springs in the 2000 Series provide even loading across the seal surfaces to maintain zero leakage even in low pressure applications.
Designed with an integral flange that allows repairs without removing the housing from the machine.
The flange attaches directly to the machine journal, providing inherently concentric mounting, minimizing overhang, and partially relieving bearing load to increase service life.
2000 SERIES OPERATING PARAMETERS
|Water, Hot Oil, Air||150 psi (Water), 100 psi (Air & Hot Oil)|
|375° F (Water), 550° F (Hot Oil)*||500 RPM|
|2 Inch to 4 Inch ASA Flange||Cast Iron Housing, Steel Shaft|
|Mono Flow and Dual Flow Configurations Available|
*Consult factory for applications exceeding 375° F