Power and Utilities | Rigging | by Christie Lagowski | Sep 18, 2019
When working with wire in utility applications, safety is of utmost importance. That’s why it’s critical to choose the correct wire grip for the task at hand. Here are four steps to help you choose the best grip for your application.
What wire size are you pulling? If you’re pulling aluminum conductor steel reinforced (ACSR) cable you may want to use a different wire grip than if you’re pulling extra-high-strength cable (EHSC).
When pulling wire, it is critical that the wire grips are properly sized to avoid slippage and safely maintain temporary tension until the wire or cable can be permanently terminated.
It is important that you choose the right wire grip for your rated working load capacity. You will not need a wire grip rated for 20,000 lbs. if the maximum working load is 4,500 lbs. However, you must ensure the grip can handle the maximum load you’ll be pulling.
Use the specifications you selected in steps one through three to select the grip you need. When choosing your grip, you may want to consider these factors as well:
To see the full line of Little Mule Wire Grips, click here.
Christie Lagowski is a Communications Manager at Columbus McKinnon Corporation. She has 6 years of experience marketing hoists and rigging products as well as crane systems and components. Christie has marketed a variety of industrial products, ranging from lifting solutions to glass technology as well as health and safety products.