By Columbus McKinnon Training | Apr 01, 2013
Hook tip loading is a common problem. While reading through one of our catalogs, Brian ran across our instructions and asked the following question,
“What does it mean to never insert a hook tip?”
Hooks typically do not fit into an eyebolt or they don’t seat properly in the saddle of the hook. This can cause side loading and weaken the strength of the eyebolt. Inserting a hook directly into the eye of the bolt often results in “Tip Loading.” A “tip load” would be any load on a hook that is not entirely or wholly seated in the saddle of the hook. Tip loading subjects the hook to an overload and is never acceptable. It is recommended that a shackle be used to connect a hook to any eyebolt to prevent any unnecessary stress. Please see the below illustration for the correct procedure.
For additional reference, please review the ASME B30.10 Hooks and B30.26 Rigging Hardware safety.
Articles authored by "Columbus McKinnon Training" were written by industry professionals with decades of unique and in-depth experience in the material handling industry who are no longer employed by Columbus McKinnon.