Columbus McKinnon Software Downloads
By downloading software from the Columbus McKinnon website, you agree to the terms of our License Agreement. Please read before downloading. **Please note, Apache Log4j is NOT used in any CMCO software
| SPA Linear Actuator with Intelli-Motion™ | ||||
| SMART Actuator EDS File v1.1 | March 9, 2022 | Download | ||
| SMART Actuator UDT (for Studio 5000) | March 9, 2022 | Download | ||
| SMART Actuator Configurator Installer | August 31, 2022 | Download | ||
| Flex IR Programmer | ||||
| IR Programmer 3.4.7.112 | January 25, 2018 | Download | ||
| Firmware | January 25, 2018 | Release Notes | Download | |
| Refer to the IR Programmer manual for instructions on how to install the software and update the firmware. | ||||
| IMPULSE Link 5 | ||||
| Version 5.10.4 | November 4, 2022 | Release Notes | System Requirements | Download |
| IMPULSE Link 5 Viewer and Professional are contained in the same software installer. The Professional version requires a USB licensing key and is included in the purchased software kit. The setup application is contained in the compressed .zip file. For the application to run properly, it is recommended that you first extract all files. |
||||
| IMPULSE Link 4.1 WDS | ||||
| IMPULSE Link 4.1 WDS Update v4.1.35 |
December 12, 2018 | Release Notes | System Requirements | Download |
| This update will not install unless a prior version exists on your PC. The setup application depends on other compressed files in the Download folder. For the application to run properly, it is recommended that you first extract all files. NOTE: Support for IMPULSE Link 4.1 was officially ended at the start of calendar year 2020. Firmware updates for the Magnetek drives released in 2020 and beyond will not be supported in IMPULSE Link 4.1. IMPULSE Link 5 Professional is the functional replacement for IMPULSE Link 4.1 Basic and WDS. Contact Magnetek Sales for upgrade information. |
||||
| IMPULSE Link 4.1 Basic | ||||
| IMPULSE Link 4.1 Basic Update v4.1.35 |
December 12, 2018 | Release Notes | System Requirements | Download |
| This update will not install unless a prior version exists on your PC. The setup application depends on other compressed files in the Download folder. For the application to run properly, it is recommended that you first extract all files. NOTE: Support for IMPULSE Link 4.1 was officially ended at the start of calendar year 2020. Firmware updates for the Magnetek drives released in 2020 and beyond will not be supported in IMPULSE Link 4.1. IMPULSE Link 5 Professional is the functional replacement for IMPULSE Link 4.1 Basic and WDS. Contact Magnetek Sales for upgrade information. |
||||
| DataLogger Series 4 | ||||
| Firmware v4.2002 | February 19, 2020 | Release Notes | Download | |
| The DataLogger Series 4 firmware file is flashed using IMPULSE Link 5 Viewer. | ||||
| EDS Files | ||||
| IMPULSE EDS Files v1.008 | April 15, 2019 | Download | ||
| EDS files for the EtherNet/IP (SI-EN3) option card compatible with the IMPULSE Series 4, G+ Mini, and D+ HHP. | ||||
| GSDML Files | ||||
| IMPULSE GSDML Files v2.3 | April 15, 2019 | Download | ||
| GSDML files for the ProfiNET (Si-EP3) option card compatible with the IMPULSE Series 4, G+ Mini, and D+ HHP. | ||||
| OmniPulse DDC Series 2 | ||||
| Firmware 44301.32 | August 1, 2020 | Release Notes | Download | |
| Firmware is flashed using the "DDC-S2/DMC-S2 Flash Utility" which is included in the IMPULSE Link 5 software. | ||||
| MagnePulse DMC Series 2 | ||||
| Firmware 41330.24 | August 19, 2020 | Release Notes | Download | |
| Firmware is flashed using the "DDC-S2/DMC-S2 Flash Utility" which is included in the IMPULSE Link 5 software. | ||||
| OmniPulse DDC Series 1 | ||||
| Firmware 3.22A | May 4, 2015 | Release Notes | Download | |
| Cost Saving Analysis Software | April 11, 2006 | Download | ||
| MagnePulse DMC Series 1 | ||||
| Firmware 10.04A | February 22, 2016 | Release Notes | Download | |
| Firmware Flasher Program | January 14, 2008 | Instructions | Download | |
| Radio Programming Software | ||||
| Programming Software for telePilot™ telePendant™ | Device Notes | Download | ||
| Radio Control Programmer v3.0.7 | December 2, 2019 | Release Notes | Download | |
Drivers
DataLogger Series 3/3+ - Windows 64bit Drivers
USB Copy Stick Driver Installation Instructions
USB Copy Stick Driver
Keyspan USA-19HS Driver – Windows 2000, XP, 2003 Server, and Vista
Keyspan USA-19HS Driver – Windows 2008 Server R2, 7, 8, and 10
| Elevator Drive Configuration Software – MagExplorer (HPV Series, Quattro, M1000, HPV1000 Drives) |
|
MagExplorer Instructions (TM7371 Rev 05) MagExplorer Driver for use on HPV900 S2 (CP210x_VCP_Win_XP_S2k3_Vista_7.zip) (Compatible with Windows XP, Vista and 7 32/64-bit) MagExplorer Driver for use on HPV900 S2 (CP210x_Universal_Windows_Driver.zip) (Compatible with Windows 10) |
North America - EN
